• Welcome to Elio Owners! Join today, registration is easy!

    You can register using your Google, Facebook, or Twitter account, just click here.

Pictures Of The P5 With The New Motor

Ty

Elio Addict
Joined
Feb 28, 2014
Messages
6,325
Reaction score
14,761
Location
Papillion, NE
Thnaks. Lots of ways that can bind or wear .... but if it works for your motorcycle throttle, it ought to be ok here.

I've read that the only difference between the manual and automatic Elio trannies is that in the auto version the computer decides the shift points, while in the manual you decide them. This suggests that the shifter really just sends an electronic signal to an actuator mounted on the transmission. In the automatic version the actuator has a brain, and in the manual, well, it doesn't and hopes the driver does! But the actuation itself is servo-driven, in which case no real force is needed to move the cable.

Have I got this right?
It's my understanding that the extra expense for the automatic is for the servos and such. The manual is just that - manual. There isn't a servo to change the gears. However, that would simplify the linkages especially with where the shifter is in relation to where the transmission is.
 

WilliamH

Elio Addict
Joined
Jan 27, 2015
Messages
2,192
Reaction score
4,831
Location
Junction, TX
Thnaks. Lots of ways that can bind or wear .... but if it works for your motorcycle throttle, it ought to be ok here.

I've read that the only difference between the manual and automatic Elio trannies is that in the auto version the computer decides the shift points, while in the manual you decide them. This suggests that the shifter really just sends an electronic signal to an actuator mounted on the transmission. In the automatic version the actuator has a brain, and in the manual, well, it doesn't and hopes the driver does! But the actuation itself is servo-driven, in which case no real force is needed to move the cable.

Have I got this right?

No. No servos. A simple cable that allows the depression of the clutch to pull the cable and pull the clutch fork. Much like a motorcycle clutch cable.
 

lnwlf40

Elio Addict
Joined
Jun 28, 2014
Messages
132
Reaction score
308
Location
moline il
:peep:Could this be the AC compressor?
7095-19bc7d122897451627ff33e17f756535.jpg
7096-8a4d7f1c01c853a17fe089d717d37c5a.jpg


Next question.... where are the spark plugs?
7097-a962696ef34ca18192a46f68ff02339d.jpg
7098-3d6ab40b748b065955a20b3a0208057b.jpg
 

Attachments

  • ac1.png
    ac1.png
    271.6 KB · Views: 206
  • ac2.png
    ac2.png
    319.1 KB · Views: 219
  • sp1.png
    sp1.png
    181 KB · Views: 210
  • sp2.png
    sp2.png
    222.8 KB · Views: 222
  • Like
Reactions: Ekh

Muzhik

Elio Addict
Joined
Sep 4, 2015
Messages
751
Reaction score
1,162
Location
Iowa
Next question.... where are the spark plugs?

This might get a little technical, so bear with me:

If you look in that photo sp2.png, you'll see three round chromey-like tubes in the right side of the picture. Just above where that leaf is resting, you'll see a little bolt-type gizmo with a wire coming out of it. Each of the tubes has a gizmo coming out of it. I'm thinking these gizmos are the spark plugs, just without the fancy insulated rubber-cap doo-dads where the wires clamp onto the gizmos.

Sound right?

:rolleyes: ;)
 
  • Like
Reactions: Ekh

JEBar

Administrator
Staff member
Administrator
Moderator
Joined
Aug 24, 2014
Messages
7,292
Reaction score
18,117
Location
Wake County, NC
JEBar, please say some more about this. What is the difference, and how did you find this out?

I asked when the tour was in Charlotte last December .... at that time the exact paint formulations hadn't been selected .... in addition, with all the tour stops, the Creamsicle paint on the P4 has been highly polished and polished and polished so as to present the best appearance
 
  • Like
Reactions: Ekh

lnwlf40

Elio Addict
Joined
Jun 28, 2014
Messages
132
Reaction score
308
Location
moline il
The spark plugs are clearly visible in the high-resolution pictures of the front of the engine in the first post of this thread. They're on the exhaust side of the head between the exhaust ports and studs.

Ah yes. Thanks Slinches. Just the tips are visible, and with no cap/wire attached they are difficult to spot.
 

3wheelin

Elio Addict
Joined
May 29, 2015
Messages
1,683
Reaction score
1,928
Location
USA
Thnaks. Lots of ways that can bind or wear .... but if it works for your motorcycle throttle, it ought to be ok here.

I've read that the only difference between the manual and automatic Elio trannies is that in the auto version the computer decides the shift points, while in the manual you decide them. This suggests that the shifter really just sends an electronic signal to an actuator mounted on the transmission. In the automatic version the actuator has a brain, and in the manual, well, it doesn't and hopes the driver does! But the actuation itself is servo-driven, in which case no real force is needed to move the cable.

Have I got this right?
There's nothing like being in control (manual) of when to change gear specially on a small engine. I honestly don't know how the automatic will perform going up hill until we get the chance for the eventual test drive prior to purchase. It'll look more sporty and more responsive with the stick, hood striping and the P3 wheel covers! ;)
 
Top Bottom