• Welcome to Elio Owners! Join today, registration is easy!

    You can register using your Google, Facebook, or Twitter account, just click here.

La Auto Show 2015

Coss

Moderator
Staff member
Moderator
Joined
Sep 5, 2014
Messages
11,100
Reaction score
16,396
Location
Battle Ground WA
Of the pictures posted yesterday, Does anyone understand the picture that has the tube pointing at the camera with the sheetmetal behind it? What is it part of?
Took me a while to figure that one out too.
I think it's the exhaust pipe with the outside cover; but it will turn out to be something else, I can just tell.

Exhaust.jpg
 

Coss

Moderator
Staff member
Moderator
Joined
Sep 5, 2014
Messages
11,100
Reaction score
16,396
Location
Battle Ground WA
One other thing I discovered that that not all of the pictures they post are from the P5; there's one they slipped on and put the P4 in:
P4 frame maybe.jpg


I don't remember seeing that "triangular" piece / gusset on the frame in any P5 frame picture they've posted.
Here's another picture from that same email

Nose 2.jpg


Gee where did the "triangle" piece / gusset go to?
 

Bert

Elio Addict
Joined
Sep 1, 2014
Messages
860
Reaction score
2,748
Location
Pueblo
Took me a while to figure that one out too.
I think it's the exhaust pipe with the outside cover; but it will turn out to be something else, I can just tell.

View attachment 7466

Looks to me like the upper rail on the passenger side (right side as you sit in it). I see part of a body panel that appears to be the right side of the autocycle as well.

When fabricating a roll cage, it's common to leave extra on the end of the part until you firmly decide where it will be butted up, or where and how another part of the cage will be attached.

I could be wrong, but that's my two cents..
 

WilliamH

Elio Addict
Joined
Jan 27, 2015
Messages
2,192
Reaction score
4,831
Location
Junction, TX
Looks to me like the upper rail on the passenger side (right side as you sit in it). I see part of a body panel that appears to be the right side of the autocycle as well.

When fabricating a roll cage, it's common to leave extra on the end of the part until you firmly decide where it will be butted up, or where and how another part of the cage will be attached.

I could be wrong, but that's my two cents..

Yes, I called it left "A" pillar looking at it from the front since there is no "passenger" side.
 

cantwait

Elio Addict
Joined
Oct 23, 2015
Messages
133
Reaction score
258
Location
Down South
Yes, I called it left "A" pillar looking at it from the front since there is no "passenger" side.
FWIW, vehicles' "right" and "left" sides are based on the normal driving direction of the vehicle. It is irrelevant whether the vehicle is a single-seater, or a tandem-seater. The meanings of right and left do not change based on where the driver or passengers sit, nor based on where the observer is located.

Maybe that confusion is why the terms port and starboard came into use.
 

RUCRAYZE

Elio Addict
Joined
Aug 17, 2014
Messages
5,103
Reaction score
8,735
Location
On Vashon Island
Port and starboard
From Wikipedia, the free encyclopedia

260px-Tapisserie_bato1.jpg
Image from the Bayeux Tapestry showing a longship with a steering oar on the starboard side.[1]
Port and starboard are nautical terms for left and right, respectively. Port is the left-hand side of or direction from a vessel, facing forward. Starboard is the right-hand side, facing forward. Since port and starboard never change, they are unambiguous references that are not relative to the observer.[2][3]
 

JEBar

Administrator
Staff member
Administrator
Moderator
Joined
Aug 24, 2014
Messages
7,292
Reaction score
18,117
Location
Wake County, NC
the last listing of a schedule for EM's tour on their website is

"Oct 24, 2015 - Oct 25, 2015 Chandler, AZ - Chandler Fashion Center - 3111 W Chandler Blvd - Times: Sat - 10am-9pm - Sun - 11am-6pm "

to me that suggest the tour folks are getting ready for the coming big reveal of the P5 at the LA Auto Show
 
Top Bottom